
K-Wires & Steinmann Pins
K-Wires (Kirschner Wires)
K-Wires (Kirschner Wires) by ZHONGJIAN TECH: precision-manufactured smooth and threaded fixation wires in diameters 0.7–1.6 mm, with trocar and diamond points, for small-bone and hand surgery fixation.
Specifications
- Diameter
- 0.7, 0.9, 1.1, 1.4, 1.6 mm (0.028, 0.035, 0.045, 0.054, 0.062 in)
- Length
- 4 in (102 mm), 5 in (127 mm), 6 in (152 mm), 9 in (229 mm)
- Point Styles
- Double Trocar; Trocar One End + Plain End; Diamond One End + Plain End; Double Diamond; Diamond + Trocar
- Thread
- NT Smooth; ST Short Partially Threaded; FT Full Threaded
- Options
- Add R for Round End; S for Sterile
- Part Number Pattern
- KQ-[diameter][point][length][NT/ST/FT]; examples KQ-07104NT, KQ-16409FT
Who it is for and where it is used
Kirschner wires, commonly called K-wires, are slim fixation wires used by orthopaedic and trauma surgeons, hand surgeons and veterinary orthopaedic teams whenever a small bone or bone fragment needs to be held in place while it heals. ZHONGJIAN TECH supplies these wires to hospitals, surgical centres and distributors that serve operating theatres where small-bone fixation is a routine part of daily practice. In the hand and wrist they are used for fractures of the phalanges and metacarpals, for scaphoid and carpal work, and for the temporary stabilisation of joints after dislocation or ligament repair. In the foot and ankle they support the fixation of metatarsals, phalanges and small tarsal fragments. The same wires are used in paediatric orthopaedics, where small diameters suit small bones, and in veterinary surgery for the fixation of small animal fractures. They are also used as guide wires and temporary pins during larger procedures, holding fragments or instruments in alignment until a definitive implant is placed, and then removed or left in place according to the surgeon's plan. Because the range covers five diameters and four lengths, a theatre can keep one family of wires on the shelf for a wide spread of cases instead of stocking many different fixation systems.
Construction and specifications
ZHONGJIAN TECH K-wires are precision-manufactured and are supplied straight, with a clean, uniform surface along the full length of the wire so that they pass smoothly through a drill guide and through bone. Each wire is identified by its diameter, its point style, its length and its thread pattern, so the right wire can be picked without ambiguity at the sterile field. Diameters are 0.7, 0.9, 1.1, 1.4 and 1.6 mm (0.028, 0.035, 0.045, 0.054 and 0.062 in). Lengths are 4 in (102 mm), 5 in (127 mm), 6 in (152 mm) and 9 in (229 mm). Point styles are Double Trocar, Trocar One End + Plain End, Diamond One End + Plain End, Double Diamond, and Diamond + Trocar. The trocar point cuts cleanly on entry, while the diamond point gives a sharp, centred tip for precise placement. Thread options are NT for Smooth, ST for Short Partially Threaded, and FT for Full Threaded. The threaded versions resist backing out and hold their position in bone, while the smooth versions are suited to temporary fixation and easy removal. A round end can be specified by adding R, and a sterile packed version by adding S. Part numbers follow the pattern KQ-[diameter][point][length][NT/ST/FT]; for example, KQ-07104NT is a 0.7 mm smooth wire, 4 in long, with a Double Trocar point (point code 1), and KQ-16409FT is a 1.6 mm fully threaded wire, 9 in long, with a Trocar One End + Plain End point (point code 4).

How to order
To order, build the part number from the four elements in the pattern KQ-[diameter][point][length][NT/ST/FT] and add R for a round end or S for sterile packing where required. First choose the diameter that matches the bone and the drill guide: 0.7 and 0.9 mm for the smallest fragments, 1.1 and 1.4 mm for general hand and foot work, and 1.6 mm where a stiffer wire is wanted. Then choose the point style that suits the entry and the bone, then the length that leaves enough wire outside the skin for handling and later removal, and finally the thread pattern: NT smooth for temporary fixation, ST short partially threaded where some grip is needed near the tip, or FT full threaded where the wire must stay in place. Quote the complete part number, for example KQ-07104NT or KQ-16409FT, when placing an order with ZHONGJIAN TECH, and state the quantity required. Wires are supplied in the lengths and diameters listed above, so please order from the published range and check the part number against the diameter, point, length and thread tables before confirming.
