Who it is for and where it is used
Large bone oscillating saw blades are the cutting blades used with an oscillating saw handpiece in large-bone orthopaedic surgery. ZHONGJIAN TECH supplies them to hospitals, surgical centres and distributors that serve operating theatres where large-bone cutting is part of everyday practice. They are used in joint replacement surgery, where a wide, even cut prepares the bone for an implant, in fracture surgery, where a large fragment has to be shaped or trimmed, and in revision work, where an earlier implant has to be removed and the bone re-cut. They are also used in spinal work and in veterinary orthopaedics for the same range of large-bone cutting tasks in animal bone. The oscillating motion, a rapid side-to-side swing through a small arc, cuts across the width of the blade and gives a broad, controlled cut face, which is what a flat implant seat needs. The range covers lengths from 63.0 to 95.0 mm and widths from 10.0 to 49.0 mm, so one family of blades can serve a wide spread of procedures, from narrower cuts in smaller bones to very wide cuts across a large bone, instead of many separate blade systems.
Construction and specifications
ZHONGJIAN TECH large bone oscillating saw blades are precision-manufactured with a toothed cutting edge that stays sharp through a cut and with a flat, even blade body that runs true in the saw handpiece. Each blade is identified by its prefix, its length, its width, its material thickness and its cut thickness, so the right blade can be picked without ambiguity at the sterile field. Lengths run from 63.0 to 95.0 mm and widths from 10.0 to 49.0 mm. Material thickness runs from 0.60 to 1.50 mm and cut thickness, the width of the slot the blade leaves in the bone, runs from 0.90 to 1.50 mm. Prefixes are BE, DE, EE and AE. The coupling code in the prefix is E, ConMed Linvatec Large Bone Oscillating, which fits ConMed Linvatec large bone oscillating saw handpieces. Tooth types A to F are available; the catalog does not publish a tooth-pitch table, so please confirm the tooth type required when ordering. Examples from the range are BE20063090, 63.0 x 13.5 mm with a cut thickness of 0.90 mm; DE33063090, 63.0 x 33.0 mm with a cut thickness of 0.90 mm; and EE25090150, 90.0 x 25.4 mm with a material thickness of 1.50 mm and a cut thickness of 1.50 mm.
Part-number matrix — by tooth type
| Tooth type | Part number | Length (L) | Width (W) | Thickness | Cut |
| A | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| B | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| C | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| D | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| E | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| F | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
Family size range
| Length (L) | Width (W) | Thickness | Cut |
| 63–95 mm | Confirm before ordering | Confirm before ordering | 0.90–1.50 mm |
Coupling codes: A–W (16 codes; there is no code L, Y, or Z). The catalog publishes no tooth-pitch table and no per-tooth-type part-number list for this family.
Example: oscillating blades swing side to side; confirm the exact part number and tooth type before ordering.
How to order
To order, quote the complete part number from the range, for example BE20063090, DE33063090 or EE25090150. First choose the length that reaches the cutting depth with enough blade outside the bone for handling. Then choose the width that suits the cut: narrower blades for tight or short cuts and wider blades for long, straight cuts, up to 49.0 mm wide. Then check the material thickness and the cut thickness, since the cut thickness sets the width of the slot left in the bone, and confirm the tooth type required, from types A to F. Then confirm the coupling: E, ConMed Linvatec Large Bone Oscillating. Quote the complete part number when placing an order with ZHONGJIAN TECH, and state the quantity required. Blades are supplied in the lengths, widths, material thicknesses and cut thicknesses listed above, so please order from the published range and check the part number against the length, width, material thickness and cut thickness tables before confirming.