Who it is for and where it is used
ZHONGJIAN TECH Torque-Limiting and Torque Plus Handles are hand-held handles for orthopaedic surgical instruments, for surgical teams in operating theatres who need to control the torque applied through a compatible instrument or attachment. Torque-Limiting Handles are intended for work where the applied torque should be limited to a set value, and Torque Plus Handles are intended for work where both a ratchet action and torque limiting are needed in one handle. The handles are for use with instruments and attachments that use the couplings stated for each part number, so compatibility should be checked by coupling type and by part number before use. This page describes the two groups as a whole, and the individual part number is the exact item to order.
The Torque-Limiting Handles are: 106-05-00, 1/4 SQ Cannulated Torque T-grip, 136 mm long and 114 mm tall, with a diameter of 37 mm; 106-12-00, Hudson Cannulated Torque T-grip, 145 mm long and 114 mm tall, with a diameter of 37 mm; 106-00-00, Mini AO Torque Cap, 120 mm long, with an 86 mm grip and a diameter of 29 mm; 106-01-00, AO Torque Cap, 118 mm long, with an 86 mm grip and a diameter of 28.6 mm; and 106-13-00, AO Pull Cannulated Torque, 118 mm long, with an 86 mm grip and a diameter of 20 mm. The Torque Plus Handles are: 106-02-00, AO Ratchet Torque Cap, 140 mm long, with a diameter of 28.6 mm; and 106-04-00, 1/4 SQ Ratchet Torque Cap T-grip, 146 mm long and 114 mm tall, with a diameter of 37 mm. For a T-grip handle, the two figures give its length and its height.
Construction and specifications
The torque value for the Torque-Limiting Handles is 0.15-15 N·m, and the handles are calibrated to ±10% accuracy for 0.5-15 N·m torque. The catalogue gives the range only, and individual handle torque values are not printed per part number, so this page does not publish a torque value for any individual part number. Please confirm the torque value per part before ordering. That point is important, because the correct torque value depends on the part number, and a range alone does not identify the torque value of a single handle.
Torque Plus Handles are 2-in-1 handles that combine ratchet and torque limiting functions in one handle. The ratchet function gives a forward and reverse action, as in a ratchet handle, and the torque limiting function limits the torque applied, as in a Torque-Limiting Handle. The two Torque Plus Handles are the AO Ratchet Torque Cap, 106-02-00, 140 mm long, with a diameter of 28.6 mm, and the 1/4 SQ Ratchet Torque Cap T-grip, 106-04-00, 146 mm long and 114 mm tall, with a diameter of 37 mm. The T-grip form gives a two-handed or cross grip, and its height and length should both be checked before ordering.
The catalogue gives one test example for a Torque Limiting Driver. In that test example, the torque was 1.13 N·m, and the total use was 75 clicks per cycle multiplied by 80 cycles, which is 6,000 clicks. This is presented only as a test example, and it is not a specification for all handles. It should not be read as the torque value, the click count or the service life of any other handle on this page. No other torque, click, material grade, certification, flow or pressure figure is stated for these handles on this page.
Torque-Limiting Handles — part-number matrix
| Part number | Torque |
| 106-00-00 | Confirm before ordering |
| 106-01-00 | Confirm before ordering |
| 106-02-00 | Confirm before ordering |
| 106-03-00 | Confirm before ordering |
| 106-04-00 | Confirm before ordering |
| 106-05-00 | Confirm before ordering |
| 106-06-00 | Confirm before ordering |
| 106-07-00 | Confirm before ordering |
| 106-08-00 | Confirm before ordering |
| 106-09-00 | Confirm before ordering |
| 106-10-00 | Confirm before ordering |
| 106-11-00 | Confirm before ordering |
| 106-12-00 | Confirm before ordering |
| 106-13-00 | Confirm before ordering |
Torque Plus Handles — part-number matrix
| Part number | Torque |
| 106-02-00 | Confirm before ordering |
| 106-04-00 | Confirm before ordering |
Torque range and accuracy
| Range | Accuracy |
| 0.15–15 N·m | ±10% (0.5–15 N·m) |
The catalog gives a torque range of 0.15–15 N·m and an accuracy of ±10% for 0.5–15 N·m, but it prints NO torque value per part number — Confirm the torque value per part before ordering.
Example: 1.13 N·m / 75 clicks × 80 cycles = 6,000 clicks is a test example only, not a product specification.
How to order
To order, choose the group first, Torque-Limiting or Torque Plus, then check the coupling, the form, the length, the height for a T-grip handle, the grip length and the diameter against the instrument and the task. Quote the full part number in the enquiry, for example 106-00-00 for the Mini AO Torque Cap handle, 120 mm long, 106-12-00 for the Hudson Cannulated Torque T-grip handle, 145 mm long, or 106-02-00 for the AO Ratchet Torque Cap Torque Plus handle, 140 mm long. Please confirm the torque value per part before ordering, because the catalogue gives the torque range only and individual handle torque values are not printed per part number. If the coupling, the form or a size is not clear from the part number, ask ZHONGJIAN TECH to confirm the part number, the coupling and the torque value before ordering. This page does not publish a price, a minimum order quantity or a lead time for these handles, and it does not state a material grade, a certification, a sterilisation method or packaging for an individual handle, so those points should be confirmed with ZHONGJIAN TECH before ordering if they are needed.