Who it is for and where it is used
Twist drills with an AO quick connect coupling are the everyday bone drills of orthopaedic and trauma surgery. ZHONGJIAN TECH supplies them to hospitals, surgical centres and distributors that serve operating theatres where bone has to be drilled cleanly and quickly for screws, pins and wires. They are used in fracture surgery to prepare pilot holes for cortical and cancellous screws, in hand and foot surgery where small diameters suit small bones, and in long-bone work where larger diameters prepare the way for bigger implants. They are also used in joint replacement and revision work, in spinal work where a pilot hole is needed before a screw is placed, and in veterinary orthopaedics for the same range of drilling tasks in animal bone. Because the coupling locks straight into a powered surgical drill or handpiece, theatre teams can change drills in seconds without a chuck key, which keeps the workflow moving during a case. The range covers seventeen diameters from 1.5 to 6.5 mm and overall lengths from 80 to 350 mm, so one family of drills can serve a wide spread of procedures instead of many separate drill systems.
Construction and specifications
ZHONGJIAN TECH twist drills are precision-manufactured with a helical flute that carries bone chips away from the cutting tip as the drill advances, and with a sharp cutting point that starts on the bone surface without wandering. Each drill is identified by its diameter and its overall length, so the right drill can be picked without ambiguity at the sterile field. Diameters are 1.5, 1.8, 2.0, 2.5, 2.7, 3.0, 3.2, 3.5, 3.8, 4.0, 4.2, 4.5, 4.8, 5.0, 5.5, 6.0 and 6.5 mm. Overall lengths run from 80 to 350 mm. Maximum overall length varies by diameter: drills of 1.5 to 2.0 mm go up to 200 mm in overall length, drills of 2.5 and 2.7 mm go up to 350 mm, and drills of 3.5 mm and above start at 100 mm in overall length. The effective length, the working length available for drilling, is the overall length less 25 mm, so effective lengths run from 55 to 325 mm; the 25 mm difference is taken up by the shank and coupling end of the drill. The coupling is AO Quick Connect, which snaps into AO-compatible powered drills and handpieces and releases just as quickly when the drill is changed. Other couplings are available on the same drill range: AO, ST Round Shank, Jacob Quick, 1/4 SQ, Hudson and Mini AO, so the same drill geometry can be supplied to suit different drive systems. A sterile packed version can be specified by adding S to the part number. Part numbers follow the pattern AO[diameter x10][overall length]; for example, AO15080 is a 1.5 mm drill, 80 mm overall, AO20100 is a 2.0 mm drill, 100 mm overall, and AO65350 is a 6.5 mm drill, 350 mm overall.
Part-number matrix — overall length (mm)
| Diameter (mm) | 80 mm | 100 mm | 350 mm |
| 1.5 | AO15080 | AO15100 | — |
| 1.8 | AO18080 | AO18100 | — |
| 2.0 | AO20080 | AO20100 | — |
| 2.5 | AO25080 | AO25100 | AO25350 |
| 2.7 | AO27080 | AO27100 | AO27350 |
| 3.0 | AO30080 | AO30100 | AO30350 |
| 3.2 | AO32080 | AO32100 | AO32350 |
| 3.5 | — | AO35100 | AO35350 |
| 3.8 | — | AO38100 | AO38350 |
| 4.0 | — | AO40100 | AO40350 |
| 4.2 | — | AO42100 | AO42350 |
| 4.5 | — | AO45100 | AO45350 |
| 4.8 | — | AO48100 | AO48350 |
| 5.0 | — | AO50100 | AO50350 |
| 5.5 | — | AO55100 | AO55350 |
| 6.0 | — | AO60100 | AO60350 |
| 6.5 | — | AO65100 | AO65350 |
Effective length — AO family (Effective = Overall − 25 mm)
| Overall length (mm) | Effective length (mm) |
| 80 | 55 |
| 100 | 75 |
| 350 | 325 |
Length limits by diameter: 1.5–2.0 mm top out at 200 mm; 2.5–2.7 mm go to 350 mm; 3.5 mm and above start at 100 mm. Cells marked — are outside these catalog limits.
Coupling: AO — Quick Connect Coupling. Other couplings in the catalog (not separate CMS products): Jacob Quick (JA), 1/4 SQ (SQ), Hudson (HU), Mini AO (MN) — Confirm before ordering. Sterile: add S to the part number.
Example: AO15080 = 1.5 mm, 80 mm overall; AO20100 = 2.0 mm, 100 mm overall; AO65350 = 6.5 mm, 350 mm overall.
How to order
To order, build the part number from the pattern AO[diameter x10][overall length] and add S where a sterile packed version is required. First choose the diameter that matches the screw or implant that will follow the drill: 1.5 and 1.8 mm for the smallest pilot holes, 2.0 to 3.2 mm for general hand, foot and small-bone work, and 3.5 to 6.5 mm for larger screws and long-bone work. Then choose the overall length that reaches the drilling depth with enough drill outside the bone for handling, remembering that the effective length is 25 mm shorter than the overall length. Then confirm the coupling: AO Quick Connect is the standard coupling for this product, and the other couplings listed above are available where a different drive system is in use. Quote the complete part number, for example AO15080, AO20100 or AO65350, when placing an order with ZHONGJIAN TECH, and state the quantity required. Drills are supplied in the diameters and overall lengths listed above, so please order from the published range and check the part number against the diameter and length tables before confirming.