ZHONGJIAN TECH Twist Drills - Round Shank
Drill Bits

Twist Drills - Round Shank

Twist Drills - Round Shank by ZHONGJIAN TECH: precision-manufactured twist drills in diameters 1.5–6.5 mm, overall lengths 80–350 mm, with ST round shank coupling for standard drill chucks.

Specifications

Diameter
1.5, 1.8, 2.0, 2.5, 2.7, 3.0, 3.2, 3.5, 3.8, 4.0, 4.2, 4.5, 4.8, 5.0, 5.5, 6.0, 6.5 mm
Overall Length
80–350 mm
Coupling
ST Round Shank
Length Availability
1.5–2.0 mm up to 200 mm; 2.5–2.7 mm up to 350 mm; 3.5 mm and above from 100 mm
Part Number Pattern
ST[diameter x10][overall length]; examples ST15080, ST30200, ST65350
Who it is for and where it is used Twist drills with a round shank are the bone drills made for standard drill chucks. ZHONGJIAN TECH supplies them to hospitals, surgical centres and distributors that serve operating theatres where a powered surgical drill or a hand drill with a conventional chuck is the drive in everyday use. They are used in fracture surgery to prepare pilot holes for cortical and cancellous screws, in hand and foot surgery where small diameters suit small bones, and in long-bone work where larger diameters prepare the way for bigger implants. They are also used in joint replacement and revision work, in spinal work where a pilot hole is needed before a screw is placed, and in veterinary orthopaedics for the same range of drilling tasks in animal bone. Because the round shank is gripped directly by the chuck, theatre teams can fit the drill to any standard powered drill or hand drill without a special coupling, which makes these drills a flexible choice where several drive systems are in use. The range covers seventeen diameters from 1.5 to 6.5 mm and overall lengths from 80 to 350 mm, so one family of drills can serve a wide spread of procedures instead of many separate drill systems.
Construction and specifications ZHONGJIAN TECH twist drills are precision-manufactured with a helical flute that carries bone chips away from the cutting tip as the drill advances, and with a sharp cutting point that starts on the bone surface without wandering. Each drill is identified by its diameter and its overall length, so the right drill can be picked without ambiguity at the sterile field. Diameters are 1.5, 1.8, 2.0, 2.5, 2.7, 3.0, 3.2, 3.5, 3.8, 4.0, 4.2, 4.5, 4.8, 5.0, 5.5, 6.0 and 6.5 mm. Overall lengths run from 80 to 350 mm, and this product is listed by overall length only, with no separate effective length column. The coupling is ST Round Shank, a plain round shank that is held by a standard drill chuck. The lengths available vary with diameter: drills of 1.5 to 2.0 mm go up to 200 mm in overall length, drills of 2.5 and 2.7 mm go up to 350 mm, and drills of 3.5 mm and above start at 100 mm in overall length. Please check the diameter and length tables for the exact combinations available. Part numbers follow the pattern ST[diameter x10][overall length]; for example, ST15080 is a 1.5 mm drill, 80 mm overall, ST30200 is a 3.0 mm drill, 200 mm overall, and ST65350 is a 6.5 mm drill, 350 mm overall.



How to order To order, build the part number from the pattern ST[diameter x10][overall length]. First choose the diameter that matches the screw or implant that will follow the drill: 1.5 and 1.8 mm for the smallest pilot holes, 2.0 to 3.2 mm for general hand, foot and small-bone work, and 3.5 to 6.5 mm for larger screws and long-bone work. Then choose the overall length that reaches the drilling depth with enough drill outside the bone for handling, remembering the length limits for the diameter chosen: 1.5 to 2.0 mm drills go up to 200 mm, 2.5 and 2.7 mm drills go up to 350 mm, and drills of 3.5 mm and above start at 100 mm. Then confirm the coupling: ST Round Shank is the coupling for this product and suits a standard drill chuck. Quote the complete part number, for example ST15080, ST30200 or ST65350, when placing an order with ZHONGJIAN TECH, and state the quantity required. Drills are supplied in the diameters and overall lengths listed above, so please order from the published range and check the part number against the diameter and length tables before confirming.

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

ZHONGJIAN TECH Twist Drills - AO Quick Connect
Drill Bits

Twist Drills - AO Quick Connect

Twist Drills - AO Quick Connect by ZHONGJIAN TECH: precision-manufactured twist drills in diameters 1.5–6.5 mm, overall lengths 80–350 mm, with AO quick connect coupling for bone drilling.

View product
ZHONGJIAN TECH Cannulated Drills - AO Quick Connect
Drill Bits

Cannulated Drills - AO Quick Connect

Cannulated Drills - AO Quick Connect by ZHONGJIAN TECH: precision-manufactured cannulated twist drills in diameters 1.5–6.5 mm, cannulation 0.8–2.5 mm, with AO quick connect coupling.

View product
ZHONGJIAN TECH Cannulated Drills - Round Shank
Drill Bits

Cannulated Drills - Round Shank

Cannulated Drills - Round Shank by ZHONGJIAN TECH: precision-manufactured cannulated twist drills in diameters 1.5–6.5 mm, cannulation 0.8–5.5 mm, with ST round shank coupling.

View product